Click image to view original image
The DVS368 is full digital 3 phase stepper driver based on DSP control. The drive voltage of which is from 24V to 80VDC. It is designed for use with the 3 phase hybrid stepper motor of all kinds with 57mm to 86mm outside diameter, regulated phase current from 2.5A to 6.2A. The highest micro step is 60000ppr. It is widely used in small size numerical control devices such as curving machine, packing machine, CNC and etc.
FEATURES
* 16 channels constant angle, constant torque micro steps, highest micro step: 60000ppr
* Highest response frequency: 200Kpps
* Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second
* Opto-isolated signal I/O
* Drive current is adjustable in 16 channels from 2.5A/phase to 6.2A/phase
* Single power supply from 24V to 80VDC
* Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 3s and it is recovered when stepper driver power on or signal MF changes from low level to high level)
